NF L34-161-1977 附助驱动器和安装垫(发动机和齿轮箱)
时间:2024-05-24 23:44:31 来源: 标准资料网 作者：标准资料网 阅读：8560
【英文标准名称】:Accessorydrivesandmountingpads(engineandgearbox).
【原文标准名称】:附助驱动器和安装垫(发动机和齿轮箱)
【标准号】:NFL34-161-1977
【标准状态】:现行
【国别】:法国
【发布日期】:1977-03-01
【实施或试行日期】:1977-02-10
【发布单位】:法国标准化协会(AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:起动;传动;联接套筒(轴);固定法兰;渐开线花键;飞行器设备;巡航发动机;联结器;飞行器部件;锁定装置及定位装置;飞行器;原动机;尺寸;名称与符号
【英文主题词】:
【摘要】:
【中国标准分类号】:V31
【国际标准分类号】:21_220_99;49_035
【页数】:17P;A4
【正文语种】:其他
Product Code:SAE AS8049/1
Title:Performance Standards for Single-Occupant, Side-Facing Seats in Civil Rotocraft, Transport Aircraft, and General Aviation Aircraft
Issuing Committee:Aircraft Seat Committee
Scope:This Society of Automotive Engineers (SAE) Aerospace Standard (AS) Annex defines Minimum Performance Standards (MPS), qualification requirements, and minimum documentation requirements for side-facing seats in civil rotorcraft, transport aircraft, and general aviation aircraft. The goal is to define test and evaluation criteria to demonstrate occupant protection when a single-occupant side-facing seat/occupant/restraint system is subjected to statically applied ultimate loads and to dynamic test conditions set forth in the applicable 14, Code of Federal Regulations (CFR) Part 23, 25, 27 or 29.While this Annex addresses system performance, responsibility for the seating system is divided between the seat supplier and the installation applicant. The seat supplier’s responsibility consists of meeting all the seat system performance requirements and obtaining and supplying to the installation applicant all the data prescribed by this document. The installation applicant has the final responsibility in assuring that all requirements for safe seat installation have been met.【英文标准名称】:Samplingandtestingcarbonblackforuseintherubberindustry-Preparationofsamplesfordeterminationofdibutylphthalateabsorptionnumber(compressedsample)
【原文标准名称】:橡胶工业用炭黑的取样和试验方法.用于测定邻苯二甲酸二丁酯吸收数的样品制备(压缩样品)
【标准号】:BS5293-19-1991
【标准状态】:作废
【国别】:英国
【发布日期】:1991-10-31
【实施或试行日期】:1991-10-31
【发布单位】:英国标准学会(BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:试样制备;吸收率(波);烟灰;炭黑;试样;含量测定;试验;测试;组件;橡胶
【英文主题词】:Absorptance;Carbonblack;Components;Determinationofcontent;Rubber;Soot;Specimenpreparation;Testspecimens;Testing;Tests
【摘要】:Twoproceduresusingdifferenttypesofcompressioncylindersandpistons.Drycarbonblackiscompressedfourtimesatapressureof165MPa.
【中国标准分类号】:G49
【国际标准分类号】:83_040_20
【页数】:12P;A4
【正文语种】:英语